Media Bottles
Cole-Parmer MEDIA BOTTLE PETG 1000 ML 10/C
Keep your system free of machining residue or bonding agents. These single-use media bottles with tubing and vent filters are perfect for fluid transfer and storage. Each polypropylene (PP) cap assembly features a platinum-cured silicone gasket for a leakproof system without any machining residue or bonding agents. Hose barb plug on tubing keeps line closed until ready for use. Use the pinch clamp to help control flow into the container or to close off the line. A 0.2 m hydrophobic PTFE filter allows for ventilation while preventing media from escaping in the event of a spill. Rigid dip tube with notch provides easy filling and extraction of media.
Alkali Scientific CellPro™ Square Media Bottles, Sterile, 250mL, 30/Tray, 60/cs
CellPro™ square media bottles, composed of high-strength plastic material, are intended for storing and transporting general reagents and cell culture reagents. The square-shaped bottles are designed to maximize space saving, durability, strength, and clarity as close to glass as possible. They have molded-in graduation scales and are non-pyrogenic, non-cytotoxic, DNase/RNase-free, and human DNA-free.
Cole-Parmer Corning Pyrex 1396 Glass Media Bottle, Square, 250 mL; 10/CS
These space-saving bottles are made of borosilicate glass for good chemical and thermal resistance. Bottles include matching polypropylene caps.
Sigma Aldrich Fine Chemicals Biosciences PyrexR round media storage
These heavy duty 500 mL PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. -A wide range of optional caps are available for these bottles -Polypropylene colored caps in a choice of orange green purple red and light gray for ease of sorting and identification. -Vented membrane cap with 0.22 mum PTfE hydrophobic membrane. -Red PBT (polybutylene terephthalate) solid caps and ETfE pouring rings for dry heat sterilization (180C). -PBT caps with silicone septa for syringe sampling or introduction of reagents.
Beckman Coulter 500 mL Conical Bottle Adapter for Allegra benchtop centrifuges (C63171)
Beckman Coulter's 500 mL conical bottle adapter (C63171) secures a single 500 mL conical bottle in a compatible centrifuge bucket or rotor, providing stable support during centrifugation and reducing bottle movement. It adapts rotor wells to accept conical bottles for processing culture bottles and similar containers.
- Capacity: 500 mL
- Holds one conical bottle per adapter
- Designed for use with benchtop centrifuge buckets and compatible rotors
- Secures bottles upright and centered during runs
- Sold individually (1 bottle per adapter) according to manufacturer listing
Foxx Life Sciences EZBiopure Titanium Round Media Bottle, 250mL, PETG, single use wide mouth bottle, GL45 Neck with Cap, Sterile, 48/CS
EZBiopure Titanium Round (TR) Media Bottles combine ergonomic design with pharmaceutical-grade safety. Constructed from crystal-clear USP Class VI PETG, these bottles are ideal for storing and sampling APIs, bulk intermediates, and culture buffers. Their specialized construction ensures stability for the long-term storage of pH-sensitive liquids, providing a versatile solution for laboratory and bioprocessing applications.
Features:
Angled shoulders ensure complete pouring, while a lower profile provides superior stability.
Molded finger grips allow for secure handling, even with gloved hands.
Includes patented VersaCap technology.
Features easy-to-read graduation marks with ± 5% accuracy.
Bottles can withstand low temperatures down to −70 ºC
Available Sizes: 125mL, 250mL, 500mL, 1000mL
Material: BPA free PETG (USP Class VI)
Gamma Compatible and Meets the sterile assurance level (SAL) of 10-6
Bellco Glass, Inc. Anaerobic Bottle, 500mL with 45mm S/C
The anaerobic culture bottle is designed for the growth of anaerobic bacteria and maintaining anaerobic conditions. The bottle features a 45mm screw cap with silicone o-ring and blue butyl rubber stopper. This allows for easy access of contents and eliminates the use of the traditional aluminum seal. Butyl rubber stopper allows for multiple punctures with a needle. Bottle is Borosilicate glass and cap is polypropylene. All components are autoclavable. Polypropylene screw cap with silicone gasket and butyl rubber stopper. Components are fully autoclavable @ 121°C. 6 per case. MADE IN THE USA.
Bellco Glass, Inc. Anaerobic Media Bottle, 1000mL
Type 1 class a Borosilicate glass that are designed for maintaining anaerobic conditions. Useful for studies involving methane-producing bacteria, cell culture, drug discovery, and research and development. MADE IN THE USA.Specifications: Size: 1l Dimensions: 100mm OD x 215mm OAH. Neck Dimensions: 19.7-20.2mm OD, 13.3-13.6mm ID. Grad. Range: 100mL-900mL, every 100mL. Neck Finish: #20 Alum Seal Neck. Supply with #20 Septum Stopper & Alum Seal.
Bellco Glass, Inc. Anaerobic Bottle, 250mL with 45mm S/C
The anaerobic culture bottle is designed for the growth of anaerobic bacteria and maintaining anaerobic conditions. The bottle features a 45mm screw cap with silicone o-ringand blue butyl rubber stopper. This allows for easy access of contents and eliminates the use of the traditional aluminum seal. Butyl rubber stopper allows for multiple punctures with a needle. Bottle is Borosilicate glass and cap is polypropylene. All components are autoclavable. Polypropylene screw cap with silicone gasket and butyl rubber stopper. Components are fully autoclavable @ 121°C.. 12 per case. MADE IN THE USA.
Bellco Glass, Inc. Anaerobic Bottle, 1000mL with 45mm S/C
The anaerobic culture bottle is designed for the growth of anaerobic bacteria and maintaining anaerobic conditions. The bottle features a 45mm screw cap with silicone o-ring and blue butyl rubber stopper. This allows for easy access of contents and eliminates the use of the traditional aluminum seal. Butyl rubber stopper allows for multiple punctures with a needle. Bottle is Borosilicate glass and cap is polypropylene. All components are autoclavable. Polypropylene screw cap with silicone gasket and butyl rubber stopper. Components are fully autoclavable @ 121°C. 6 per case. MADE IN THE USA.
Bellco Glass, Inc. Media Bottle Only,1000mL No Cap or Ring
Manufactured from Type 1 Class A Borosilicate Glass. These media storage bottles are chemically resistant ans stable. They are suitable for storage as well as for mixing and sampling. They are autoclavable and have white graduations and marking spot. DIMENSIONS: 101mm X 225mm TALL. MADE IN THE USA
Bellco Glass, Inc. Media Bottle Only,50mL No Cap
Manufactured from Type 1 Class A Borosilicate Glass. Flat bottom Borosilicate glass tube with 32mm thread opening. Screened with a 10mm white marking spot. -TUBE MEASURES APPROXIMATELY 32MM OD X 94MM OAL Port assembly is manufactured from 316L stainless steel. Electropolished for easy cleaning. -LONG TUBE EXTENDS APPROXIMATELY 25MM ABOVE/BELOW THE CAP;SHORT TUBE EXTENDS 25MM ABOVE THE CAP. -SUPPLIED WITH A 32MM OPEN TOPBLUE POLYPROPYLENE CAP & WHITE SILICONE SEALING GASKET. MADE IN THE USA
Bellco Glass, Inc. Media Bttle W/Blue S/Cap,500mL Schott
Manufactured from Type 1 Class A Borosilicate Glass. These media storage bottles are chemically resistant ans stable. They are suitable for storage as well as for mixing and sampling. They are autoclavable and have white graduations and marking spot. . On sizes 100-200mL there is a full capacity line. These bottles include a linerless blue polypropylene cap and pouring ring. DIMENSIONS: 85mm X 176mm TALL